Chimney flashing is the layered metal and sealant where a chimney meets the roof, and it is one of the most common places for Houston leaks to start. A local roofing contractor can usually reseal or rebuild it without touching the roof around it. Call the number on this page to be connected with a local roofing contractor in Houston.

What chimney flashing does
A chimney pokes through the roof like a wall in the path of running water. Flashing lets that water slide around the masonry instead of behind it. The usual setup has step pieces along the sides, a back piece called a cricket or saddle on the uphill face, and counter-flashing tucked into the mortar joints above. Brick ranch homes inside Houston and the 1960s to 1980s brick suburbs often have a chimney that has outlasted two or three roofs.
Signs the flashing has failed
- A brown ring or drip on the ceiling or the wall beside the fireplace, mostly after a hard downpour.
- Damp or musty smell in the attic near the chimney chase.
- Black streaks of tar or sealant that has cracked or pulled away, visible from the yard with binoculars.
- Rust, gaps or lifted edges in the metal, or crumbling mortar at the counter-flashing line.
Stay off the roof to look. Houston heat bakes shingles slick and soft, and a wet roof is worse. Use binoculars from the ground, then check the attic with a flashlight and set a bucket under any drip.
What a roofer does on the visit
The contractor looks at the flashing, the mortar, the cricket and the shingles around the base. A small gap may only need new sealant and a mortar repair. Rusted or badly bent metal is usually replaced, with the shingles around it lifted and relaid. Wide chimneys on a Houston roof tend to need a cricket, because pooled water on the uphill side finds every weakness. Ask for the scope in writing, including what metal is used and how the counter-flashing is set into the masonry.
What it costs
A national cost guide from This Old House puts general flashing repair, which includes chimney work, at roughly $150 to $1,000 per job across the US. A Texas guide from Modernize lists flashing repair at $350 to $1,100 per job. Those are not Houston quotes, and a wide masonry chimney or a rebuilt cricket can fall outside them, so get written bids.
Storms, insurance and permits
Spring wind and hail can bend flashing, and hurricane-season rain tests every seam. If an insurer pays for storm damage, the Texas Department of Insurance says you owe your deductible and a roofer cannot legally absorb it. A contractor also cannot act as your public adjuster. A flashing repair alone is usually small enough that the deductible exceeds the bill. If the chimney work comes with a full re-roof, the Houston Permitting Center requires a Residential Roofing Permit with plan review and an inspection. In the windstorm area near Galveston Bay and the coast, ask who schedules the TDI inspection.
Houston angle
Live oaks and pines drop debris that collects behind a chimney and holds moisture against the metal. Clearing it is a job for a roofer or a person on a ladder with a pro, not a weekend scramble in the rain.
Chimney Flashing Repair questions from Houston homeowners
Can sealant alone fix chimney flashing?
Is the leak from the chimney or the roof?
Does flashing repair require a permit in Houston?
How do I get connected with a roofer?
Related roofing services in Houston
Helpful guides
Chimney Flashing Repair in nearby cities and towns
Harris County
Fort Bend County
Brazoria County
Galveston County
Montgomery County
Sources
Last updated: