Base flashing and counter flashing work as a pair, with one tucked under the shingles and the other set into the masonry and lapped over it. A leak means one of the two has failed. Call the number on this page to be connected with a local roofing contractor in Crosby.

Leaks only in some storms
If water appears only when wind pushes rain from one direction, a single face of the chimney likely has the gap. Note the direction of the wind and the time. A roofer can use that clue to examine the correct side. Roofers see this often.
Why chimney flashing fails
Chimneys and roofs expand and contract at different rates in the Texas heat, so the joint between them moves daily. Sealant cracks, metal rusts and mortar loosens, and storms push water into the gaps. A roofer can usually tell on one visit which part of the chimney is to blame.
Needles and leaves from trees around Crosby collect behind chimneys and hold moisture against flashing, speeding rust and mortar decay.
Metal choices
Aluminum, galvanized steel and copper are all used. Aluminum and galvanized cost less, while copper lasts longest and costs more. In humid climates, corrosion resistance matters, so ask what metal the roofer proposes. The joint that leaks in a storm often looks perfectly normal on a dry, sunny afternoon.
Know this about Crosby roofs
Because Crosby has no city government of its own, there is no city reroof permit to pull, but deed restrictions or an HOA may still set rules on roofing material and color.
The Texas Department of Insurance advises reading every page before you sign, never signing with blanks, and being wary of a large down payment.
Long, hot summers wear on roofs here. Dark shingles soak up heat, and older shingles lose granules and some of their ability to shed it.
Tall pines around Crosby drop needles that fill valleys and gutters and keep parts of the roof shaded and damp.
If a tree or storm has brought down a power line near the roof, stay well away and call 911 first.
Because Crosby is farther from the core of the metro, scheduling can take a little longer and some companies add a trip charge; ask when you call.
Calls from Crosby are often matched with roofers who also cover Channelview, Highlands and Huffman.
What the roofer inspects
Expect a look at base flashing, counter flashing, mortar joints, the crown, the cap and any cricket. The roofer may check the roof deck near the chimney for soft spots and examine the attic for matching stains. Photos help the roofer. Keep the paperwork from the repair.
If water is coming through the fireplace
- Close the damper if it is safe to do so
- Lay towels and a tarp on the hearth floor
- Do not light a fire in a wet firebox
- Photograph the area
The joint that leaks in a storm often looks perfectly normal on a dry, sunny afternoon.
Chimney Flashing Repair questions in Crosby
How do I tell flashing from masonry problems?
Who fixes mortar and brick?
Are metal chimneys different?
Should I replace flashing during a reroof?
More roofing services in Crosby
Chimney Flashing Repair nearby
Helpful guides
Sources
Last updated: